BrainyCP

alenka писал(а): ↑

Ср май 18, 2022 11:09 am

Для centos перед установкой панели выполните команду:
yum -y install wget
Для ubuntu:
apt-get -y install wget

[root@KOMPIK ~]# yum -y install wget
Загружены модули: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7 ... nfra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Неизвестная ошибка"


One of the configured repositories failed (Неизвестно),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...

4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:

yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>

5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

alenka писал(а): ↑

Пн авг 19, 2024 7:31 am

centos7 более не поддерживается redhat
https://community.brainycp.com/viewtopic.php?f=9&t=5362

alenka писал(а): ↑

Пн авг 19, 2024 10:14 am

ls -al /etc/yum.repos.d/
cat /etc/redhat-release

demonx писал(а): ↑

Вс авг 18, 2024 10:27 am

alenka писал(а): ↑

Ср май 18, 2022 11:09 am

Для centos перед установкой панели выполните команду:
yum -y install wget
Для ubuntu:
apt-get -y install wget

[root@KOMPIK ~]# yum -y install wget
Загружены модули: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7 ... nfra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Неизвестная ошибка"


One of the configured repositories failed (Неизвестно),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...

4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:

yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>

5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

Что оно хочет? До этого ж работало

alenka писал(а): ↑

Вт авг 20, 2024 7:07 am

demonx писал(а): ↑

Вс авг 18, 2024 10:27 am

alenka писал(а): ↑

Ср май 18, 2022 11:09 am

Для centos перед установкой панели выполните команду:
yum -y install wget
Для ubuntu:
apt-get -y install wget

[root@KOMPIK ~]# yum -y install wget
Загружены модули: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7 ... nfra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Неизвестная ошибка"


One of the configured repositories failed (Неизвестно),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...

4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:

yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>

5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

Что оно хочет? До этого ж работало

Это был ответ, на данный пост.
Показать вывод по командам.

[root@KOMPIK ~]# yum -y install wget
CentOS-8 - AppStream 0.0 B/s | 0 B 00:01
CentOS-8 - Base 0.0 B/s | 0 B 00:01
CentOS-8 - Extras 0.0 B/s | 0 B 00:01
Не удается синхронизировать кэш для репозитория «AppStream», игнорируя это репо.
Не удается синхронизировать кэш для репозитория «BaseOS», игнорируя это репо.
Не удается синхронизировать кэш для репозитория «extras», игнорируя это репо.
Отсутствуют совпадения для аргумента: wget
Ошибка: Совпадений не найдено

[root@KOMPIK ~]# ls -al /etc/yum.repos.d/
итого 60
drwxr-xr-x. 2 root root 4096 авг 20 17:28 .
drwxr-xr-x. 81 root root 8192 авг 20 17:34 ..
-rw-r--r--. 1 root root 731 авг 14 2019 CentOS-AppStream.repo
-rw-r--r--. 1 root root 712 авг 14 2019 CentOS-Base.repo
-rw-r--r--. 1 root root 798 авг 14 2019 CentOS-centosplus.repo
-rw-r--r--. 1 root root 1320 авг 14 2019 CentOS-CR.repo
-rw-r--r--. 1 root root 668 авг 14 2019 CentOS-Debuginfo.repo
-rw-r--r--. 1 root root 756 авг 14 2019 CentOS-Extras.repo
-rw-r--r--. 1 root root 338 авг 14 2019 CentOS-fasttrack.repo
-rw-r--r--. 1 root root 928 авг 14 2019 CentOS-Media.repo
-rw-r--r--. 1 root root 736 авг 14 2019 CentOS-PowerTools.repo
-rw-r--r--. 1 root root 1382 авг 14 2019 CentOS-Sources.repo
-rw-r--r--. 1 root root 74 авг 14 2019 CentOS-Vault.repo
[root@KOMPIK ~]# cat /etc/redhat-release^C